Print Friendly and PDF
If you are in Europe or Asia and using a mobile phone, then most probably you are using GSM technology in your mobile phone. GSM stands for Global System for Mobile Communication. It is a digital cellular technology used for transmitting mobile voice and data services.
If you are in Europe or Asia and using a mobile phone, then most probably you are using GSM technology in your mobile phone.
    GSM stands for Global System for Mobile Communication. It is a digital cellular technology used for transmitting mobile voice and data services. 
  • The concept of GSM emerged from a cell-based mobile radio system at Bell Laboratories in the early 1970s. 
  • GSM is the name of a standardization group established in 1982 to create a common European mobile telephone standard. 
  • GSM is the most widely accepted standard in telecommunications and it is implemented globally. 
  • GSM is a circuit-switched system that divides each 200 kHz channel into eight 25 kHz time-slots. GSM operates on the mobile communication bands 900 MHz and 1800 MHz in most parts of the world. In the US, GSM operates in the bands 850 MHz and 1900 MHz. 
  • GSM owns a market share of more than 70 percent of the world's digital cellular subscribers. 
  • GSM makes use of narrowband Time Division Multiple Access (TDMA) technique for transmitting signals. 
  • GSM was developed using digital technology. It has an ability to carry 64 kbps to 120 Mbps of data rates. 
  • Presently GSM supports more than one billion mobile subscribers in more than 210 countries throughout the world. 
  • GSM provides basic to advanced voice and data services including roaming service. Roaming is the ability to use your GSM phone number in another GSM network.
GSM digitizes and compresses data, then sends it down through a channel with two other streams of user data, each in its own timeslot.

Why GSM?

Listed below are the features of GSM that account for its popularity and wide acceptance.
  • Improved spectrum efficiency 
  • International roaming 
  • Low-cost mobile sets and base stations (BSs) 
  • High-quality speech 
  • Compatibility with Integrated Services Digital Network (ISDN) and other telephone company services 
  • Support for new services

GSM History

The following table shows some of the important events in the rollout of the GSM system.
YearsEvents
1982Conference of European Posts and Telegraph (CEPT) establishes a GSM group to widen the standards for a pan-European cellular mobile system.
1985A list of recommendations to be generated by the group is accepted.
1986Executed field tests to check the different radio techniques recommended for the air interface.
1987Time Division Multiple Access (TDMA) is chosen as the access method (with Frequency Division Multiple Access [FDMA]). The initial Memorandum of Understanding (MoU) is signed by telecommunication operators representing 12 countries.
1988GSM system is validated.
1989The European Telecommunications Standards Institute (ETSI) was given the responsibility of the GSM specifications.
1990Phase 1 of the GSM specifications is delivered.
1991Commercial launch of the GSM service occurs. The DCS1800 specifications are finalized.
1992The addition of the countries that signed the GSM MoU takes place. Coverage spreads to larger cities and airports.
1993Coverage of main roads GSM services starts outside Europe.
1994Data transmission capabilities launched. The number of networks rises to 69 in 43 countries by the end of 1994.
1995Phase 2 of the GSM specifications occurs. Coverage is extended to rural areas.
1996June: 133 network in 81 countries operational.
1997July: 200 network in 109 countries operational, around 44 million subscribers worldwide.
1999Wireless Application Protocol (WAP) came into existence and became operational in 130 countries with 260 million subscribers.
2000General Packet Radio Service(GPRS) came into existence.
2001As of May 2001, over 550 million people were subscribers to mobile telecommunications.
zubairsaif

Zubair saif

A passionate writer who loves to write on new technology and programming

Post A Comment:

0 comments: